1/8" (3.20 mm)
MONOCONDUCTOR
1N12
6
PROPERTIES:
Cable Diameter:
0.126" +0.004" -0.002"
(3.20mm + 0.10mm -0.05mm)
Minimum Sheave Diameter:
7"
(18 cm)
Cable Stretch Coefficient
6.5 ft/Kft/Klbs
(7.30 m/Km/5KN)
ELECTRICAL:
Maximum Conductor Voltage
300 VDC
Conductor AWG Rating
24
Minimum Insulation Resistance
1,500 MegaW /Kft @ 500VDC
(457 MegaW /Km @ 500VDC)
Armor Electrical Resistance:
13.0 W /Kft
(42.6 W /Km)
MECHANICAL:
Cable Breaking Strength:
Ends Fixed: :
1,600 lbs
(7.1 KN) Nominal
Maximum Suggested Working Tension:
800 lbs
(3.5 KN)
Number and Size of Wires:
Inner Armor
12 x 0.0175"
(0.444 mm)
Outer Armor
18 x 0.0175"
(0.444 mm)
Average Wire Breaking Strength:
Inner Armor
65 lbs
(0.29 KN)
Outer Armor
65 lbs
(0.29 KN)
|
Cable Type |
Core Description |
Cable Weight |
||||||||
|
Temp |
Plastic |
Insulation |
Copper |
Res |
Cap. |
O.D. |
in |
in |
Spec. |
|
|
°F |
in |
in |
W /Kft W /Km |
pf/ft |
in |
lbs/Kft |
||||
|
1N12RP |
300 |
Poly |
0.0175 |
7x0.0085 |
21.0 |
41 |
0.060 |
28 |
24 |
6.31 |
|
1N12RZ |
500 |
Tefzel |
0.0175 |
7x0.0085 |
21.0 |
48 |
0.060 |
30 |
25 |
6.52 |
*
The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed and cables are post tensioned.*
Core assembly – Copper strand consists of six wires around one center wire. Conductor resistance is measured at 68 deg. F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.*
SUPERSEAL, a special pressure seal agent, is applied between armor layers.*
The temperature rating assumes a normal gradient for both temperature and weight.*
All values shown are nominal or typical values.
May - 04