1/10" (2.54 mm)
MONOCONDUCTOR
1N10

5

PROPERTIES:

Cable Diameter:

0.101" +0.004" -0.002"

(2.56mm + 0.10mm -0.05mm)

Minimum Sheave Diameter:

6"

(15 cm)

Cable Stretch Coefficient

13.1 ft/Kft/Klbs

(14.72 m/Km/5KN)

ELECTRICAL:

Maximum Conductor Voltage

300 VDC

Conductor AWG Rating

24

Minimum Insulation Resistance

1,500 MegaW /Kft @ 500VDC

(457 MegaW /Km @ 500VDC)

Armor Electrical Resistance:

22.0 W /Kft

(72.2 W /Km)

MECHANICAL:

Ends Fixed:

1,000 lbs

(4.4 KN) Nominal

Maximum Suggested Working Tension:

500 lbs

(2.2 KN)

Number and Size of Wires:

Inner Armor

12 x 0.0140"

(0.356 mm)

Outer Armor

18 x 0.0140"

(0.356 mm)

Average Wire Breaking Strength:

Inner Armor

42 lbs

(0.19 KN)

Outer Armor

42 lbs

(0.19 KN)

* The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed and cables are post tensioned.

* Core assembly – Copper strand consists of six wires around one center wire. Conductor resistance is measured at 68 deg. F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.

* SUPERSEAL, a special pressure seal agent, is applied between armor layers.

* The temperature rating assumes a normal gradient for both temperature and weight.

* All values shown are nominal or typical values.

May-04

Catalog | Monoconductor | 3-conductor | 4-conductor | 7-conductor | Swablines | Special Cables 

Home | Our Story | Distributors | News | Contact Us | Manual | Features | Designation | Warranty | Calculator | Español